In today's semiconductor industry, heat dissipation can almost be said to be the most important aspect that cannot be ignored except for PPA (power consumption, performance, and area). Taking mobile SoC as an example, the problem of chip overheating and frequency reduction affects any smartphone on the market.
Categories：Product knowledge Date：2025-01-07 Hits：371 View »
The technical indicators used to indicate the performance and applicability of diodes are called diode parameters, and different types of diodes have different characteristic parameters.
Categories：Product knowledge Date：2025-01-07 Hits：360 View »
The exterior of a vacuum diode is a metal or glass cover, and the air inside is precisely extracted to form a vacuum state.
Categories：Product knowledge Date：2025-01-07 Hits：379 View »
The rectifier bridge stack product is composed of four rectifier silicon chips connected in a bridge configuration and encapsulated with insulating plastic. The high-power rectifier bridge is encapsulated with a zinc metal shell outside the insulation layer to enhance heat dissipation.
Categories：Product knowledge Date：2025-01-06 Hits：387 View »
In general, there are three numbers in the naming of rectifier bridges. The first number represents the rated current, A; the last two numbers represent the rated voltage (number * 100), V
Categories：Product knowledge Date：2025-01-06 Hits：374 View »
Schottky diodes are divided into two packaging forms: lead and surface mount (patch). Schottky diodes with lead type packaging are commonly used as high-frequency high current rectifier diodes, freewheeling diodes, or protective diodes.
Categories：Product knowledge Date：2025-01-06 Hits：368 View »
Schottky diode, also known as Schottky barrier diode (SBD), is a low-power, ultra high speed semiconductor device.
Categories：Product knowledge Date：2025-01-06 Hits：365 View »
The transistor has a current amplification function, which essentially means that the transistor can control the large change in collector current with a small change in base current. This is the most fundamental and important characteristic of a transistor.
Categories：Product knowledge Date：2025-01-06 Hits：360 View »
A transistor is made by fabricating two PN junctions that are very close to each other on a semiconductor substrate. The two PN junctions divide the entire semiconductor into three parts, with the middle part being the base region and the two sides being the emitter and collector regions. There are two arrangements: PNP and NPN.
Categories：Product knowledge Date：2025-01-06 Hits：348 View »
YFW 2025 Spring Festival Holiday Notice
Categories：Company News Date：2025-01-03 Hits：606 View »
